ฮาร์เนส สายรัดตัวสำหรับทำงานบนต้นไม้ รุกขกร เข็มขัดปีนต้นไม้ dmm kinis max

✓คุณภาพสูง ✓ของแท้ ✓พร้อมส่งด่วนทั่วไทย ✓หน้าร้าน ✓คำแนะนำ

The Kinisi is a modular and hard wearing sit harness, ideal for use across a range of tree care, aerial and rescue applications.

No shortage of experience and heritage has gone into creating the design. Treemagineers have been at the forefront of professional product development for nearly 20 years, and DMM has been with them on every step of this journey. For the Kinisi, Treemagineers have pushed harness design to a new high.

To bring the design to life and maintain only the best build quality, DMM have evolved from supplying hardware to producing the complete harness at our new production facility here in North Wales.

ADDITIONAL FEATURES

Maximum comfort and support. Webbing is woven through a supporting material and then padded with foam, providing comfort by spreading the user's weight over a large surface area. This structural webbing is then slimmed down where bulk would inhibit movement.

Designed to last. All hardware is optimised to be textile friendly and reduce webbing wear.

Replaceable components for enhanced lifespan. Users have the option to replace the pads, elastic keeper loops, leg elastics and loops, rear elastics, riser webbing, bridges, and bridge hardware.

Independently evaluated to the performance requirements of the following international standards:

ASNZ 1891 – Pass
ANSI/ASSP - Z359.12-2019 – Pass
CAN/CSA - Z259.12 – Pass
ASTM F0887-20 – Pass except the structural webbing is under 44.5mm and the harness has a rear attachment point.
CSA Z259.1-05 PD saddle – Pass except the structural webbing is under 41mm.

Vast customisation options

Customisable rope and webbing bridges. Available in a variety of different terminations and lengths.

Removeable webbing stoppers. Webbing lengths can be shortened to the user's requirements.

Bosun Chair compatible. Eyelets on the forward Ds can be combined with the Bosun Chair kit.

Attachment slots for non-PPE upper assemblies.

DMM component compatibility

DMM harness accessories. Pre-cut holes allow use of XSRE carabiners, Stowaways, and the Caiman.

Multiple storage solutions. Gear brackets allow use of the Vault range and Parking Lot.

Harness attachments for restraint according to EN358. Rear restraint point can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO.

Harness attachments for work positioning according to EN358. Side rings can be used with classic DMM hardware such as the PerfectO, Ultra O, and AmericanO.

Harness attachments for suspension and work positioning according to EN813. Forward Ds are compatible with DMM connectors. Rope bridges work with a range of hardware including Anchor Rings, Ultra O, Axis Swivels or the Rigger Pulley. Webbing bridges work with Anchor Rings, AmericanO, Compact Shackle, and Axis Swivels.

See links below for full information on all customisation options and replaceable components.